Cargo Compartment Door Lock Handle (Chevrolet Tahoe 2)

Removal

1. Remove the door trim panel.

2. Pull back the door seal.

3. Disconnect the lower door lock opening cable from the handle.

4. Loosen the handle mounting screws. Tightening torque 9 Nm.

5. Remove the handle from the door.

6. Disconnect the upper door lock opening cable from the handle.

Installation

7. Installation is carried out in reverse order.

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Tahoe 2 and 3: Doors, locks and windows

Upper cargo door hinge
Lower cargo door hinge
Tailgate lock cylinder for cargo area
Tailgate lock for cargo compartment
Tailgate handle for cargo area

Cargo Compartment Composite Door Lock Drive
Lock rod and outer handle of the composite cargo compartment door
Lower cargo door lock
Upper cargo door lock
Middle door panel

See similar articles on the topic of Chevrolet cars:
Replacing the inner handle of the front door lock actuator Chevrolet Aveo T300 (2012-2018)
Door lock retainer Chevrolet Captiva 1 (2006-2018)
Replacing the inner handle of the front door lock actuator Chevrolet Cruze 1 (2008-2016)
Removal the lock cylinder and the outer handle of the front door Chevrolet Lacetti 1 (2002-2009)
Removal the lock, lock cylinder mechanism, outer and inner front door handles Chevrolet Lanos T150 (2002-2009)
Adjusting the front door lock Chevrolet Niva 1 (2002-2016)
Latch, Lock Cylinder and Door Handle — Removal and Installation Chevrolet Trailblazer 1 (2001-2008, petrol)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet

Tahoe 2 and 3 (2000-2014)