Cargo Compartment Composite Door Lock Drive (Chevrolet Tahoe 2)

Removal

1. Remove the door trim panel.

2. Remove the door seal.

3. Remove the lock drive rod.

4. Disconnect the drive wiring connector.

5. Remove the lock handle cable.

6. Remove the lock drive cable.

7. Loosen the bolts securing the drive to the door. Tightening torque 9 Nm.

8. Remove the drive.

Installation

9. Installation is carried out in reverse order.

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Tahoe 2 and 3: Doors, locks and windows

Cargo Compartment Door Lock Handle
Upper cargo door hinge
Lower cargo door hinge
Tailgate lock cylinder for cargo area
Tailgate lock for cargo compartment

Lock rod and outer handle of the composite cargo compartment door
Lower cargo door lock
Upper cargo door lock
Middle door panel
Middle door hinges

See similar articles on the topic of Chevrolet cars:
Replacing the inner handle of the front door lock actuator Chevrolet Aveo T300 (2012-2018)
Door lock retainer Chevrolet Captiva 1 (2006-2018)
Replacing the inner handle of the front door lock actuator Chevrolet Cruze 1 (2008-2016)
Removal the electric drive of the luggage compartment door lock Chevrolet Lacetti 1 (2002-2009)
Removal the lock, lock cylinder mechanism, outer and inner front door handles Chevrolet Lanos T150 (2002-2009)
Adjusting the front door lock Chevrolet Niva 1 (2002-2016)
Installation diagram of the central lock (sliding door) Chevrolet Lumina 1 (1989-1994)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet

Tahoe 2 and 3 (2000-2014)