Tailgate lock cylinder for cargo area (Chevrolet Tahoe 2)

Removal

1. Open the cargo compartment roof.

2. Press the spring-loaded lock catch.

3. Turn the lock cylinder a quarter turn clockwise.

4. Remove the lock cylinder.

Installation

1. Install the lock into the roof of the cargo compartment.

2. Turn the lock cylinder a quarter turn counterclockwise.

The article is based on data from the website: «CHEVYMAN.RU»

The article was checked: Vladimir Romannikov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Tahoe 2 and 3: Doors, locks and windows

Tailgate lock for cargo compartment
Tailgate handle for cargo area
Rear side of the cargo compartment
Pressure relief valve
Fuel tank filler flap

Lower cargo door hinge
Upper cargo door hinge
Cargo Compartment Door Lock Handle
Cargo Compartment Composite Door Lock Drive
Lock rod and outer handle of the composite cargo compartment door

See similar articles on the topic of Chevrolet cars:
Replacing the ignition switch (lock) cylinder Chevrolet Aveo T300 (2012-2018)
Ignition Lock Cylinder — Removal and Installation Chevrolet Captiva 1 (2006-2018)
Checking the level and adding fluid to the brake master cylinder reservoir Chevrolet Cruze 1 (2008-2016)
Removal the lock cylinder and the outer handle of the front door Chevrolet Lacetti 1 (2002-2009)
Removal the lock, lock cylinder mechanism, outer and inner front door handles Chevrolet Lanos T150 (2002-2009)
Cylinder block Chevrolet Niva 1 (2002-2016)
Replacing the ignition lock cylinder Chevrolet Lumina 1 (1989-1994)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet

Tahoe 2 and 3 (2000-2014)