To return a rear seatback section from the folded position to its normal position, bring it to the upright position and then press firmly backwards on the upper edge of the seatback until the lock engages. After returning the folding sections of the rear seatback to their normal position, make sure that each section of the seatback is securely locked. To do this, without touching the lock button, push the seatback section backwards, then pull its upper edge toward you. The seatback should remain in place. Make sure that the seat belts are not twisted or pinched between the folding sections of the seatback. Straighten the seat belts and place them in their places.
Warning: Do not place luggage or other loads above the level of the front seat backs. Otherwise, in the event of sudden braking or a traffic accident, these loads may come off and injure people in the car.
Do not allow passengers to sit on the folded rear seatback while the vehicle is moving.
Double folding rear seatback (Hatchback model only)
To fold the rear seat to increase cargo space:
- lower the rear seat headrests completely;
- lower the rear seat backs; pull the buckle and seat belt out of the space between the backrest and the seat;
- unlock the seat by pulling the handles located behind the seat;
- lift, fold and attach the seat to the front seat headrests using the built-in hooks;
- place the buckles and seat belts of the rear seat in the niche under the carpet.
To return the rear seat to its original position, perform all of the above operations in reverse order.
The material was created based on information from the website: «ChevyMan.ru»