You will need: key «on 7», a special plastic mounting spatula, a screwdriver with a flat blade.
1. Disconnect the wire from the terminal «minus» battery.
2. Pry off the edge...
3.... and disconnect from the panel the extension of the upper part of the casing of the steering column (see «Removal and installation of casings of a steering column»).
4. Pry off the top trim of the instrument cluster...
5.... and, overcoming the force of the spring clips, remove it.
6. Turn out three screws of fastening of a combination of devices...
7.... and take it away from the instrument panel.
8. Press the clamp of the holder of the block of the wiring harness...
9.... and fold out the holder.
10. Disconnect the wiring harness block from the instrument cluster and remove the combination.
11. Establish a combination of devices in an order, the return to removal.