Contents: Removal ↧ Installation ↧
Removal
1. Raise the vehicle and place safety stands under the frame.
2. Place a temporary support under the bridge beam.
3. Disconnect the parking brake cable from the Panhard rod.
4. Unscrew the tie rod mounting bolts and nuts. Tightening torque 105 Nm.
Note: The final tightening of the lever mounting bolts is carried out with the vehicle standing on its wheels.
On the right side |
On the left side |
5. Remove the traction bar from the vehicle.
Installation
6. Installation in reverse order.
[The original text can be found on the website «CHEVYMAN.RU»]