Rear Suspension Spring (1500 Models) (Chevrolet Tahoe 2)

Removal

1. Raise the vehicle and place safety stands under the frame.

2. Place a temporary support (jack) under the bridge beam.

3. If the suspension is electronically controlled, disconnect the body height sensor connector.

4. Loosen the nuts securing the anti-roll bar links to the frame. Tightening torque 65 Nm.



5. Unscrew the bolts and nuts securing the shock absorber to the axle beam. Tightening torque 95 Nm.

Series 1500 (GMT800/900), 2500 (GMT800)

2500 Series (GMT900)

6. Lower the bridge beam until the suspension spring is completely unloaded.



7. Remove the spring and upper insulator.

Installation

8. Installation in reverse order.

[The article was borrowed from the website chevyman]