Removal
Remove the starter assembly.
- 1. Starter assembly
- 2. Starter solenoid relay
- 3. Starter through screw
- 4. Cover with contacts
- 5. Brush holder
- 6. Stator
- 7. Anchor elements
- 8. Set of rings
- 9. Gear
- 10. Anchor
- 11 Power lever
- 12. Starter housing
Preparatory work
Before directly removing the starter, the following work must be performed:
- unscrew the upper and lower starter mounting screws;
- unscrew the nuts and disconnect the cable.
Disassembly
Disassemble in the order shown in the figure.
Assembly
Assembly is carried out in the reverse order of disassembly.
Installation
Installation is carried out in the reverse order of removal.
Tightening torques
| Element of the system | Tightening torque |
| Starter mounting screws | 40 Nm |
| Cable fastening nut | 15 Nm |