Withdrawal
Remove in the order shown in the figure.
- 1. Thermostat screw
- 2. Thermostat
- 3. Thermostat gasket
- 4. Coolant pump mounting screw
- 5. coolant pump
- 6. Coolant pump gasket
Preparatory work
Before removing the coolant pump and thermostat, the following work must be carried out:
- drain coolant;
- remove the rear timing cover;
- Remove the upper radiator hose from the thermostat housing.
Installation
Installation is made in an order, the return to removal.
Tightening torques
System element | Torque |
Screw for thermostat | 20 Nm |
Coolant pump fixing screw | 10 Nm |