Removal and installation the front mudguard (Chevrolet Aveo T300)

1. Remove the front wheel and place the vehicle on secure supports.



2. Unscrew the three mudguard liner mounting nuts.

NOTE: This is how the front mudguard liner mounting nuts are located.

3. Remove the two screws securing the mudguard to the front bumper...



4. ...then three screws securing the mudguard liner to the front of the wing...





5. ...and two screws for fastening to the rear part of the wing.



6. Using a screwdriver, push out the core of the fender liner fastening clip to the body sill...



7. ...and remove the retainer.



8. Similarly, remove the three fasteners securing the mudguard liner to the engine compartment splash guard...





9. ...and remove the fender liner.

10. Install the front fender liner in the reverse order of removal.

(The text of the article was obtained from the website: «CHEVYMAN»)