1. Disconnect the wire from the negative terminal of the battery.
2. Remove the front mudguard liner (see "Removal and installation of wheel arch liners and mudguards").
3. Remove the side turn signal (see "Replacing the side turn signal").
4. Pry up the edge of the decorative trim in front of the outside rearview mirror...
5. ...and remove the cover.
6. Unscrew the bolt located under the trim that secures the wing to the front body pillar.
7. Bend back the seal in the wheel arch and unscrew the nut securing the wing to the front body pillar.
8. Remove the two bolts securing the upper wing to the engine compartment frame.
9. Remove the lower wing mounting bolt.
10. Remove the front bumper (see "Removal and installation the front bumper").
11. Remove the headlight (see "Headlight replacement").
12. Remove the air intake box grille (see "Removal and installation the air intake box grille").
13. Unscrew the wing mounting bolt located under the air intake box grille.
14. Remove the two front wing mounting bolts and remove the wing.
15. Install the front wing in the reverse order of removal.
[Original version of the article on the website: «CHEVYMAN»]