The hinged units include side doors, hood, and trunk lid (tailgate), front fenders, front and rear bumpers. Side doors, hood, trunk lid (tailgate) attached to the body with hinges, the front fenders with bolts.
The side doors are equipped with sliding windows, and are also equipped with electric windows for the front and rear doors (depending on the configuration).
The side door and side panel glass, the rear glass are bent, polished, tempered. The windshield is a triplex type. The windshield and rear glass are glued into the corresponding openings of the body, the rear glass is equipped with electric heating.
The front and rear bumpers are made of plastic, painted in the body color, and attached to the body with screws and plastic pins.
The driver's seat is adjustable in the longitudinal direction, in the backrest tilt and in height (not on all trim levels), front passenger seat - longitudinally and by the backrest tilt. The front and rear seats are equipped with height-adjustable headrests. The backrest of the rear seat can be folded forward (in whole or in parts depending on the configuration).
The driver and all passengers have inertia seat belts. The driver and front passenger seats are equipped with seat belt pretensioners.
To improve the safety of passengers and the driver, the car is equipped with a passive safety system (SRS), which combines front airbags for the driver and front passenger.
The volume, temperature, direction and intensity of air flows in the car's interior are regulated by switches installed in the heating system control unit (air conditioning) and interior ventilation, as well as handles for adjusting the nozzles on the instrument panel.
Exhaust ventilation of the body is carried out through deflectors with valves, which are installed under the rear bumper.
USEFUL TIP: When parking your car for a long time, do not cover the body with a cover made of thick material. A cover that gets wet in the rain creates a steam "bath" when heated in the sun, and the paintwork underneath may peel off and swell. In addition, gusts of wind cause the cover to move and erase the paint on the protruding parts of the body.
Do not place rubber objects on the body. After some time, the rubber will leave a residue on the coating (especially light) indelible stains. From time to time, pass a thin metal plate between the side glass and the rubber door strip to remove dust, sand and protect the glass from scratches. After washing, be sure to remove the rubber mats and dry the interior. Moisture under the mats is the main cause of floor corrosion.