Replacing the right front and rear door window lifter control switches (Chevrolet Aveo T300)

You will need: a 7 mm socket head, a TORX T20 key, a plastic mounting blade, and a flat-blade screwdriver.

NOTE: The work is shown using the left rear door as an example. The work is performed similarly on the right front and right rear doors.

1. Disconnect the wire from the negative terminal of the battery.



2. Remove the door trim (see "Removal and installation the rear door trim").



3. Remove five screws from the inside of the upholstery (figure 10.10) fastening the cover to the door armrest.





4. Remove the trim from the door trim.





5. Press the clamps...



6. ...disconnect the switch from the cover and remove it.



7. Install the power window switch in the reverse order of removal.