Contents: Removal ↧ Installation ↧
Removal
1. Disconnect the negative battery cable.
2. Disconnect the return spring from the clutch pedal.
3. Remove the nut, washer and pedal axle.
4. Remove the locking clip and push rod retaining pin.
5. Remove the push rod from the clutch pedal.
6. Remove the clutch pedal.
Installation
1. Install the clutch pedal.
2. Coat the push rod with general purpose grease.
3. Install the push rod onto the clutch pedal.
4. Install the locking bracket and push rod retaining pin.
5. Install the pedal axle and tighten the nut to 20 Nm.
6. Install the return spring.
7. Connect the negative battery cable,
- 1. Clutch pedal mounting
- 2. Nut
- 3. Pedal rod
- 4. Bolt
- 5. E-ring
- 6. Bushing
- 7. Pin
- 8. Nut
- 9. Clutch pedal buffer
- 10. Bushing
- 11. Rotation spring
- 12. Clutch pedal
- 13. Clutch pedal cushion
- 14. Clutch pedal buffer
(Original version of the article on the website «chevyman.ru»)