Withdrawal
Attention: Before disconnecting the tank tank hose, remove the liquid from the expansion tank.
1. Remove the locking bracket.
2. Remove push rod lock pin and push rod.
3. Remove the master cylinder replenishment hose clamp.
4. Disconnect the master cylinder refill hose.
5. Remove the master cylinder pressure tube.
6. Turn off nuts of fastening of the main cylinder of coupling.
7. Remove the clutch master cylinder.
Installation
1. Install the clutch master cylinder and tighten the master cylinder nuts to 22 Nm.
2. Connect pressure tube to master cylinder.
3. Connect the master cylinder refill hose.
4. Secure the hose with a clamp.
5. Install push rod lock pin and push rod.
6. Install the locking bracket.
7. Remove air from the system.
8. Adjust the position of the clutch pedal.
9. Add fluid to the expansion tank to the maximum level.