1. Reduce the pressure in the supply system (see «Reducing the pressure in the power system»).
2. Slide the retaining clip on the fuel supply hose end.
3. Press the release button...
4....and disconnect the hose end from the fuel pulsation compensator outlet fitting.
NOTE: When removing the hose, some fuel may leak out. Wipe it off with a rag.
5. Disconnect the hose tip from the compensator inlet fitting in the same way.
6. Remove the compensator inlet from the holder.
7. Unfasten the latch of the fastening clamp...
8.... and remove the fuel pulsation compensator.
9. Install the fuel surge compensator in the reverse order of removal.