The throttle control pedal is removed for replacement in case of failure, as it is a non-repairable unit and is only supplied as an assembly in spare parts.
1. Disconnect the wire from the terminal «minus» battery.
2. Remove the lower decorative shield of the instrument panel (see «Removal and installation of the lower decorative guard of the instrument panel»).
NOTE: Steering column removed for photographic clarity.
3. Pull out the stopper of the throttle pedal position sensor wiring harness block...
4.... squeeze the latch and disconnect the block from the pedal.
5. Turn out a bolt of fastening of a pedal of management by a throttle valve to an arm of a pedal assembly...
6.... and remove the pedal.
7. Install the throttle control pedal in the reverse order of removal.