Oil pressure sensor
See sections "Oil manifold" or "Camber cover" this chapter, depending on the engine version.
Withdrawal
1. Raise the vehicle and place the safety stands under the frame.
2. Place a container under the oil pan drain plug to collect the oil.
3. Remove the drain plug (430), drain the oil.
4. Replace the drain plug. Tighten the stopper. Tightening torque 25 Nm.
5. Disconnect the connector (4) oil level sensor.
6. Remove the level sensor. Tightening torque 20 Nm.
Installation
7. Installation is carried out in the reverse order.