Checking and installing the clutch pressure plate (Chevrolet Aveo T200)

Examination

1. Check the spring pin for wear.

2. Check the surface of the pressure plate for wear or cracks.

3. Check the surface for oil contamination. After checking, replace the pressure plate if necessary.

Installation

1. Apply general purpose grease to the clutch disc spline.

2. Align the pressure plate and clutch disc on the flywheel using a drift.

3. Install the pressure plate on the flywheel and tighten the pressure plate mounting screws to a torque of 15 Nm.

4. Remove the driven disk centering mandrel.



5. Install the gearbox into the vehicle.


(The article was borrowed from the website: «ChevyMan.ru»)