1. Turn the steering wheel all the way towards the hinge to be removed.
2. Turn off a nut of fastening of a spherical finger of a tip of steering draft. When installing, tighten to a torque of 45 Nm.
3. Loosen the tie rod end locknut. When installing, tighten to 54 Nm.
4. Vypressuyte a finger of a tip from the lever of a rotary fist by means of a stripper.
5. Remove the tip from the steering rod, be sure to unscrew it and count the number of revolutions. When installing, screw on the new tip by the same number of turns.
6. Installation is carried out in the reverse order.